Rugs can quickly become dirty and stained, and regular vacuuming may not be enough to remove all the dirt, dust, and stains. In these cases, a pressure washer can be a great solution for quickly and easily cleaning the rugs. The rugs will be clean, but they will also be free of any harmful chemicals. The cleaning of rugs or carpets inside whether in a commercial or domestic situation should only be done by a professional contractor with the right equipment and professional indemnity insurance.
Table of Contents
Why Use A Pressure Washer To Clean Rugs?
There are many reasons to clean the rugs with a pressure washer with the help of the Best Carpet Cleaner. The dog has been pottying in the corner for the past year, and now it is time to decide on a deep clean. Or just moving into a new house and want to remove all the previous residents’ dirt and stains.
Whatever the reasoning is, a pressure washer can be a quick and easy way to clean the rugs. Rugs are difficult to clean by hand and even more difficult to clean if they are large or oddly shaped. A pressure washer can quickly blast away dirt, dust, and stains, making the rugs look new again.
A pressure washer is the best way to go when looking for an easy and efficient way to clean rugs. It is also an environmentally-friendly option to traditional rug-cleaning methods. And finally, it is cheaper! A pressure washer can be more cost-effective than hiring a professional rug cleaner.
A pressure washer is a great way to clean rugs quickly and easily. Carpet Cleaners can get the job done much faster than to try and clean them by hand.
Not all pressure washers are created equal. There are three types of pressure washers: electric, gas and diesel. Diesel and gas pressure washers are more powerful and can be used for tougher jobs, like cleaning cars or decks. Electric pressure washers are less powerful but compact, ideal for smaller cleaning jobs like rugs. When choosing a pressure washer, make sure to consider the size of the job.
What Kind Of Detergent To Use?
Make sure to use a detergent specifically designed for pressure washers. This will leave the rugs dirty, but it will also gunk up the internals of the pressure washer over time. Regular detergents will not work, as they will just be blasted away with the high pressure and end up floating in the water tank.
Many people think that a pressure washer is only for outdoor cleaning tasks like removing lichen or algae from garden walls or cleaning Driveways and patios. However, a pressure washer can also be used for indoor cleaning tasks such as cleaning rugs if it is being completed by a professional contractor with the correct equipment.
To clean rugs with a pressure washer, one must use a detergent specifically designed for this task. Read the manufacturer’s instructions carefully, as using the wrong detergent can damage carpets.
How To Set Up A Pressure Washer For Cleaning Rugs?
Different machines have different settings, and no one will want to damage the rug by using the wrong one; hence, read the instructions carefully. For lighter cleaning jobs, like removing dust or loose dirt, use the low-pressure setting.
Initially, it is important to set up the pressure washer correctly for cleaning rugs. Make sure to have the correct nozzle tip for the job; hence have a wide-spray nozzle for rugs. Next, adjust the pressure on the pressure washer to medium or low. Do not use too much pressure, or it will damage the rug.
Finally, assess the spray on an inconspicuous rug area to ensure the water is hot enough and correct the pressure. Once everything is ready to start cleaning, hold the pressure washer about eighteen inches away from the rug and slowly move it back and forth across the surface.
How To Clean The Rug?
Firstly, make sure to move any furniture or other items in the way e.g., patio furniture. If the rug is too heavy to move, try to elevate it as much as possible. Once everything is cleared, it is time to start cleaning!
Be sure to evaluate the pressure washer on an inconspicuous area of the rug first to make sure the fabric can withstand the force of the water. If it is safe to proceed, start spraying a section of the rug with the pressure washer set to full power.
Do not forget to get the edges and corners! Rinse with clean water and repeat until the entire rug is clean. Allow it to air dry before putting it back in place.
How to Dry the Rug After Pressure Washing?
Once finished cleaning the rug with the pressure washer, the next step is to dry it. This is an important step, as no one wants the rug to stay wet for too long and start to smell or attract insects.
There are a couple of methods to do this. One is to place the rug outside in the sun. The UV rays from the sun will help to dry it out quickly. Another option is to use a blow-dryer on a low setting. Be careful not to damage the rug by overheating it. Once it is completely dry, then reinstall it in the home.
Once pressure-washed the rugs, make sure to dry them as quickly as possible. This will prevent any unwanted mildew or bacteria from growing. A good way is to hang them up on a clothesline or lay them out in the sun. If it is a hot day, the sun will do most of the work. Another alternate option is to use a fan to help speed up the drying process. Ensure to keep an eye on them and turn the fan off at night so they do not get too cold.
Conclusion:
Technology has grown so much, and everything has become easy now. Using a pressure washer is easy and quick to clean the rugs. Hence, with Carpet Cleaning Services’ help, cleaning the rug has become stress-less for any rug like synthetic or oriental rugs.
Ensure the correct detergent for the type of rug, and always evaluate the detergent on a small area of the carpet to ensure it does not damage the fibers.
This a guest post by Ross Willis for OzCleaningGeelong