How To Use A Pressure Washer Safely And Effectively

These appliances are becoming more and more popular nowadays, but many homeowners do not know how to use a pressure washer in a safe manner while also preventing damage to various surfaces and objects.

Read on these pressure washer tips and learn how to effectively use such a device to get the most out of it.

Use the Proper Protective Gear

Before getting to the question of how to use a pressure washer, you should first make sure that you gear yourself with the proper safety equipment. Get a pair of protective goggles and also a pair of shoes with a rubberized sole.

This will prevent you from slipping when walking on wet and slippery surfaces. You may also want to add a pair of gloves and wear a long-sleeved shirt and long pants in order to protect yourself from flying debris and dirt.

how to use a pressure washer safely

Prepare the Working Environment

Before learning how to use a pressure washer, you should also make sure to prepare the working environment.

Pressure washers are quite powerful and they can damage plants or breakable objects. Move all the objects out of the way and cover the surfaces you want to be protected before starting to spray.

Get the Power Washer Ready

Depending on the type of pressure washer, you want to get the device ready for work. If it’s an electrical pressure washer, make sure to connect the electrical plug to the machine. In the case of a gas power washer, fill it with gasoline or engine oil depending on its type.

Next, you need to connect the water supply to the power washer. Plug a garden hose into the water inlet of the washer and don’t forget to turn on the water supply – not doing so can cause the pump to become damaged.

If you want more efficient cleaning, fill the reservoir of the machine with a detergent solution. The last step before starting to spray is to attach the right type of spray tip to the nozzle. Make sure you have the appropriate one for the type of cleaning and surface you want to clean.

Start Cleaning

Now that you know how to get ready, you also need to know how to use a pressure washer to clean properly. Stay at a minimum distance of 2 feet away from the surface you are about to clean in order to avoid damaging it.

The sprayer tip should be no closer than 12 inches from the surface. To prevent debris from flying all over, you should hold the nozzle at an angle of 45 degrees to the cleaning surface.

If you’re wondering about how to start a pressure washer, you should know that you can activate it just by pulling the trigger. Once you start cleaning, you should use side to side movements.

Also, make sure you don’t stay on one spot for too long so as not to damage it. Apply any detergent if needed – just let it soak for a few minutes before you rinse it.

Follow these tips on how to use a pressure washer and also make sure you check the manufacturer’s instructions – this will allow you to use it safely and properly for your cleaning needs.

Recommended best pressure washers

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top